Billion BiPAC 8200N Instrukcja Użytkownika

BiPAC 8200N802.11n VDSL2 Firewall Router User Manual Last revised on Mar 2010Firmware Version 1.02f

Device DescriptionThe Front LEDsLED Meaning1 PowerLit red when the device is booting. Lit green when the system is ready. Flashes when the system is r

URL FilterURL (Uniform Resource Locator) (e.g. an address in the form of http://www.abcde.com or http://www.example.com) lter rule allows you to prev

4. Please be note that the completed URL, “www” + domain name shall be specied. For example to block trafc to www.google.com.au, enter “www.google”

QoS - Quality of ServiceQoS helps you to control the data upload trafc of each application from LAN (Ethernet and/ or Wireless) to

100DSCP Marking: Differentiated Services Code Point (DSCP), it is the rst 6 bits in the ToS byte. DSCP Marking allows users to classify the trafc of

Internal IP Address: The IP address values for Local LAN machines you want to control. (For IP packets from LAN to WAN, it is the source IP address. F

Example: QoS for your NetworkConnection DiagramApplication IP / Ports Control Flow Data Rate Time ScheduleVoIP user 192.168.0.1 Outgoing Minimal 20% w

103Example: QoS SetupVoIP applicationVoice is latency-sensitive application. Most VoIP devices are used SIP protocol and the port number will be assig

104Virtual ServerVirtual Server allows you to direct incoming trafc from WAN side (identied by Protocol and External port) to the Internal server wi

Example: List of some well-known and registered port numbers. The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assign

106Port MappingSince NAT acts as a “natural” Internet rewall, your router protects your network from accessed by outside users, as all incoming conne

8The Rear Ports Port Meaning1 DSLConnect this port to the VDSL/telephone network with the RJ-11 cable (telephone) provided.2 EthernetConnect a UTP Eth

Edit: Check the Edit radio button to display the parameter of the selected application, then after changing the parameters click the Edit/Delete butto

108DMZThe DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP address as the DMZ Host, all incoming packets th

109Wake on LANWOL allows the router to set a command to turn on a particular computer that can support this feature.Click Add to save the setting.Edit

Time ScheduleThe Time Schedule supports up to 16 time slots which helps you to manage your Internet connection. In each time prole, you may schedule

111AdvancedConguration options within the Advanced section are for users who wish to take advantage of the more advanced features of the router. User

Static ARPThis feature allows you to map the layer-2 MAC (Media Access Control) address that corresponds to the layer-3 IP address of the device.IP Ad

Dynamic DNSThe Dynamic DNS function lets you alias a dynamic IP address to a static hostname, so if your ISP does not assign you a static IP address y

114VLANVLAN (Virtual Local Area Network) is a group of devices on different physical LAN segments that can communicate with each other as if they were

115Device Management The Device Management advanced conguration settings allows you to control your router’s security options and device monitoring f

Universal Plug and Play (UPnP)UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with the feature to control data

9Recovery Operation1. Recovery procedures for non-working routers (e.g. after a failed rmware upgrade ash):The system will check the rmware of this

117Installing UPnP in Windows ExampleFollow the steps below to install the UPnP in Windows Me.Step 1: Click Start and Control Panel. Double-click Add/

118Step 4: Click OK to go back to the Add/Remove Programs Properties window. Click Next.Step 5: Restart the computer when prompted.Follow the steps be

119Step 6: Click OK to go back to the Windows Optional Networking Component Wizard window and click Next.Auto-discover Your UPnP-enabled Network Devic

120Step 4: You may edit or delete the port mappings or click Add to manually add port mappings.Step 5: Select Show icon in notication area when conne

121Step 6: Double-click on the icon to display your current Internet connection status.Web Congurator Easy AccessWith UPnP, you can access web-based

122IGMPIGMP, known as Internet Group Management Protocol, is used to manage hosts from multicast group.IGMP Proxy: IGMP proxy enables the system to is

SNMP Access ControlSoftware on a PC within the LAN is required in order to utilize this function – Simple Network Management Protocol.ParametersSNMP:

TR-069 ClientPlease contact your ISP for the information of TR069.Inform: You may enable or disable the periodic inform feature. ACS URL: Enter the AC

125Remote AccessRemote Access Control: Enable: Select Enable to allow management access from remote side (mostly from internet).Duration: Set how man

Save Conguration to FlashAfter changing the router’s conguration settings, you must save all of the conguration parameters to FLASH to avoid losing

CablingOne of the most common causes of problems is because of bad cabling or VDSL line(s). Make sure that all connected devices are turned on. On the

RestartClick “Restart” with option Current Settings to reboot your router (and restore your last saved conguration).If you wish to restart the router

LogoutTo exit the router web interface, click “Logout”. Please save your conguration setting before logging out of the system. A Warning screen will

Chapter 5: TroubleshootingIf your router is not functioning properly, please refer to the suggested solutions provided in this chapter. If your proble

130Appendix: Product Support & ContactIf you come across any problems please contact the dealer from where you purchased your prod-uct.Contact Bil

Chapter 3: Basic Installation The router can be congured through your web browser. A web browser is included as a standard application in the followi

12Applications of the deviceDeployment scenario for VDSL using FTTx

Network CongurationConguring PC in Windows 71. Go to Start. Click on Control Panel.2. Then click on Network and Internet.3. When the Network a

145. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties.6. In the TCP/IPv4 properties window, select the Obtain an IP address a

Conguring PC in Windows Vista1. Go to Start. Click on Network.2. Then click on Network and Sharing Center at the top bar.3. When the Network an

165. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties.6. In the TCP/IPv4 properties window, select the Obtain an IP address a

Table of ContentsChapter 1: Product ... 1Introduction to your Router ...

17Conguring PC in Windows XP1. Go to Start > Control Panel (in Classic View). In the Control Panel, double-click on Network Connections2. Double

18Conguring PC in Windows 20001. Go to Start > Settings > Control Panel. In the Control Panel, double-click on Network and Dial-up Connec

19Conguring PC in Windows 95/98/Me1. Go to Start > Settings > Control Panel. In the Control Panel, double-click on Network and choose t

20Conguring PC in Windows NT4.01. Go to Start > Settings > Control Panel. In the Control Panel, double-click on Network and choose the Pr

21Factory Default SettingsBefore conguring your router, you need to know the following default settings.Web Interface (Username and Password) Userna

22Information from your ISP Before conguring this device, you have to check with your ISP (Internet Service Provider) to nd out what kind of servic

Chapter 4: CongurationTo easily congure this device for internet access, you must have IE 5.0 / Netscape 4.5 or above installed on your computer. Th

4. Please enter all the information in the blanks provided and then click Continue.5. The device will reboot and then load the new conguration. Not

7. Select Enable and enter the necessary information in the blanks provided for the Wireless LAN setting (wireless setting is only available for BiPA

26Conguration via Web InterfaceOpen your web browser, enter the IP address of your router, which by default is 192.168.1.254, and click “Go”, a login

Obtain IP Address Automatically (VDSL) ... 35Fixed IP Address (VDSL) ...

27Quick StartWhether on the Basic or Advanced Conguration Mode, click Quick Start link to WAN Port setup pages.Step 1: This screen displays some info

28Step 2: Click on Continue to choose the Protocol to connect with EWAN or click Jump to Wireless Setting to use Protocol. There are 3 types of connec

29Note: If the WAN line is not ready, a page will display as below and your new conguration can not be saved.Step 4: After the conguration is succes

30WAN Connect ModeThere are 4 types of wireless connect modes: Obtain an IP Address Automatically, Fixed IP Address, PPPoE connection and Pure Bridge.

PPPoEPPPoE (PPP over Ethernet) provides access control in a manner which is similar to dial-up services using PPP.Username: Enter the username provide

32Wireless Setting ModeThere are 4 types of wireless security modes: WPA Pre-Shared Key, WPA2 Pre-Shared Key, WPA/WPA2 Pre-Shared Key and WEP.WPA / WP

WEPWLAN Service: Default setting is set to Enable. If you want to use wireless, you can select Enable.ESSID: The ESSID is the unique name of a wireles

34Basic Conguration ModeStatusDevice InformationModel Name: Provide a name for the router for identication purposes.System Up-Time: Record system up

35WAN – Main Port: VDSLA WAN (Wide Area Network) is an outside connection to another network or the Internet.Obtain IP Address Automatically (VDSL)By

Fixed IP Address (VDSL)A Static WAN connection will be congured according to the IP properties dened by your ISP.Protocol: Select the protocol you w

Chapter 1: ProductIntroduction to your RouterThank you for purchasing BiPAC 8200N Router. Your new router is an all-in-one unit that combines a VDSL m

37PPPoE Connection (VDSL)PPPoE (PPP over Ethernet) provides access control in a manner which is similar to dial-up services using PPP.Protocol: Select

Pure Bridge (VDSL)Protocol: Select the protocol you will use in the device.Click Apply to conrm the change.38

39WAN – Main Port: EWANA WAN (Wide Area Network) is an outside connection to another network or the Internet.Obtain IP Address Automatically (EWAN)By

Fixed IP Address (EWAN)A Static WAN connection will be congured according to the IP properties dened by your ISP.Protocol: Select the protocol you w

41PPPoE Connection (EWAN)PPPoE (PPP over Ethernet) provides access control in a manner which is similar to dial-up services using PPP.Protocol: Select

WLANWireless ParametersWLAN Service: Default setting is set to Enable. If you do not have any wireless, select Disable. ESSID: The ESSID is a unique n

43Security ModeWPA / WPA2 / WPA/WPA2 Pre-Shared KeySecurity Mode: You can disable or enable with WPA or WEP for protecting wireless network.WPA Shared

44Advanced Conguration ModeStatusDevice InformationModel Name: Displays the model name.Host Name: Provide a name for the router for identication pur

45Connection: The current connection status.IP Address: WAN port IP address.Netmask: WAN port IP subnet mask. Gateway: The IP address of the default g

46VDSL StatusVDSL (Very High Bitrate DSL) is a DSL technology providing faster data transmission. It can achieve incredible speeds and provides a comp

EWANBesides using VDSL to get connected to the Internet, this router offers its Ethernet port 4 as a WAN port to be used to connect to Cable Modems an

47ARP TableThis table stores mapping information that the device uses to nd the Layer 2 Media Access Control (MAC) address that corresponds to the La

48DHCP TableThe DHCP Table lists the DHCP lease information for all IP addresses assigned by the DHCP server in the device.IP Address: The IP address

49System LogDisplay system logs accumulated up to the present time. You can trace its historical information with this function.Refresh: Click to upda

50Firewall LogFirewall Log displays the log information of any unexpected events that occurs to your rewall settings. This page displays the router F

UPnP PortmapThis section lists all the established port-mapping using UPnP (Universal Plug and Play). Name: The Host Name of the internal UPNP client.

52CongurationWhen you click this item, the column will expand to display the sub-items that will allow you to further congure your router.LAN, WAN,

LAN - Local Area NetworkA Local Area Network (LAN) is a shared communication system network where many computers are connected. This type of network i

IP AliasThis function allows the addition an IP alias to the network interface. It further allows user the exibility to assign a specic function to

WirelessParametersWLAN Service: Default setting is set to Enable. If you do not have any wireless, select Disable. Mode: The default setting is 802.1

ESSID: The ESSID is the unique name of a wireless access point (AP) used to distinguish one from another. For security propose, change to a unique ID

Quality of Service (QoS)QoS gives you full control over which types of outgoing data trafc should be given priority by the router, ensuring important

57WDS Service: The default setting is disabled. Check Enable radio button to activate this function. 1. Peer WDS MAC Address: It is the associated AP

Wireless SecurityYou can disable or enable wireless security function using WPA or WEP for protecting wireless network. The default mode of wireless s

WEPSecurity Mode: Choose the type of security mode WEP from the drop-down menu.WEP Authentication: To prevent unauthorized wireless stations from acce

WPSWPS (WiFi Protected Setup) feature is a standard protocol created by Wi-Fi Alliance. This feature greatly simplies the steps needed to create a Wi

Wi-Fi Network SetupPIN Method: Congure AP as Registrar1. Jot down the client’s Pin (eg. 16837546).2. Enter the Enrollee’s PIN number and then press

4. The client’s SSID and security setting will now be congured to match the SSID and security setting of the registrar.62

PIN Method: Congure AP as Enrollee1. In the WPS conguration page, change the Role to Enrollee. Then press Start.2. Jot down the WPS PIN (eg. 25879

644. The router’s (AP’s) SSID and security setting will now be congured to match the SSID and security setting of the registrar.5. Now to make sure

65

66

Features • Compliant with ITU-T G.993.2 , G.994.1 and G.997.1 VDSL2 Standard• VDSL2 Proles: 8a/b/c/d, 12a/b, 17a, 30a• Band Plan 997 and 998 supporte

67PBC Method:1. Press the PBC button of the AP.2. Launch the wireless client’s WPS Utility (eg. Ralink Utility). Set the Cong Mode as Enrollee. The

683. When the PBC button is pushed, a wireless communication will be established between your router and the PC. The client’s SSID and security setti

69Wi-Fi Network Setup with Windows Vista WCN:1. Jot down the AP PIN from the Web (eg. 25879810).2. Access the Wireless conguration of the web GUI.

704. Enter the AP SSID then click Next.5. Enter the passphrase then click Next.

6. When you have come to this step, you will have comleted the Wi-Fi network setup using the built-in WCN feature in Windows Vista.71

72DHCP ServerDHCP allows networked devices to obtain information on the parameter of IP, Netmask, Gateway as well as DNS through the Ethernet Address

73WAN - Wide Area NetworkA WAN (Wide Area Network) is a computer network that covers a broad geographical area (eg. Internet) that is used to connect

Fixed IP Address (VDSL)A Static WAN connection will be congured according to the IP properties dened by your ISP.Protocol: Select the protocol you w

75PPPoE (VDSL)PPPoE (PPP over Ethernet) provides access control in a manner which is similar to dial-up services using PPP.Protocol: Select the protoc

MAC Spoong: This option is required by some service Providers. You must ll the MAC address specied by your service provider when this information i

5Hardware Specications Physical Interface • WLAN: 2 x antennae• DSL: VDSL port• Ethernet: 4-port 10/100Mbps auto-crossover (MDI / MDI-X) Switch• Rese

Pure Bridge (VDSL)Protocol: Select the protocol you will use in the device.Click Apply to conrm the change.77

78WAN Prole - Main Port: EWANBesides using VDSL to get connected to the Internet, the VDSL router offers its Ethernet port 4 as a WAN port to be used

Fixed IP Address (EWAN)A Static WAN connection will be congured according to the IP properties dened by your ISP.Line Speed: Set the downstream and

80PPPoE (EWAN)PPPoE (PPP over Ethernet) provides access control in a manner which is similar to dial-up services using PPP.Line Speed: Set the downstr

Idle Timeout: Auto-disconnect the broadband rewall gateway when there is no activity on the line for a predetermined period of time. MTU: Maximum Tr

82SystemThere are the items within the System section: Time Zone, Firmware Upgrade, Backup/Restore, Restart, User Management and Mail alert.Time ZoneT

Firmware UpgradeYour router’s rmware is the software that enables it to operate and provides all its functionality. Think of your router as a dedic

84Backup / RestoreThese functions allow you to save a backup of the current conguration of your router to a dened location on your PC, or to restore

85RestartThere are 2 options for you to choose from before restarting the your 8200N device. You can either choose to restart your device to restore i

86User ManagementIn order to prevent unauthorized access to your router conguration interface, it requires all users to login with a username and pas

Chapter 2: Product OverviewPackage Contents• 8200N 802.11n VDSL2 Firewall Router• Antenna x 2• CD containing the on-line manual • RJ-11 xDSL / telepho

Add an account1. Check the Valid checkbox, ll in all the information: User name, Comment (optional), Password, Conrm Password.2. When it is done,

Mail AlertMail Alert allows administrator to receive notications from the router through email about important events that is occurring in real time.

89FirewallFirewall and Access ControlYour router includes a full SPI (Stateful Packet Inspection) rewall for controlling Internet access from your LA

90Packet FilterPacket ltering enables you to congure your router to block specic internal / external users (IP address) from Internet access, or di

91Add: Click this button to add a new packet lter rule and the added rule will appear at the bottom table.Edit: Check Edit next to the item you wish

MAC FilterA MAC (Media Access Control) address is the unique network hardware identier for each PC on your network’s interface (i.e. its Network Inte

Intrusion DetectionThe router Intrusion Detection System (IDS) is used to detect hacker’s attack and intrusion attempts from the Internet. If the IDS

Table: Hacker attack types recognized by the IDSIntrusion Name Detect Parameter BlacklistType of Block DurationDrop Packet Show LogAscend Kill Ascend

Src IP: Source IP Src Port: Source PortDst Port: Destination Port Dst IP: Destination IP95

Block WAN PingThis feature is to be enabled when you want the public WAN IP address on your router not to respond to any ping command.This feature is